Donut Robot® Plungers:

For all current Donut Robot Fryers

PLAIN PLUNGER

Produces a plain ring donut.

Available sizes: 1", 1-9/16"

STAR PLUNGER

Produces a ring donut with a "star" pattern around the hole. This is the standard plunger supplied with non-GP Donut Robots,
size 1-9/16"

FRENCH CAKE

Not for French Crullers. To make French Crullers, try the Donut Robot Mark 9.

Available sizes: 1-9/16"

DOUBLE-MINIATURE

Standard on all GP models. Requires a double-miniature hopper. Deposits two donuts at a time instead of one.

Plunger size: 1" only.

ATTACHMENTS

These are small economical ways to make more varieties. Attachments come in one size, and fit a 1-9/16" plain plunger.

DUNKERETTE ATTACHMENT

Forms 2 donuts as shown.

BALL ATTACHMENT

Produces 4 separate balls, or joined balls, depending on the height of the hopper and the type of mix.

NUGGET ATTACHMENT

Produces 3 separate or joined balls, depending on the height of the hopper and the type of mix.

NOTE: PLUNGER SIZE AND DEPOSIT WEIGHT

In general , plunger size determines the diameter of the donut. Deposit weight determines the thickness of the donut. Deposit weight is controlled by adjusting a dial on the Donut Robot depositor.