Plungers For Type K Donut Depositor

PLAIN PLUNGER

Produces a plain ring donut.

1" size makes mini-donuts 3-5 oz. per dozen¹.
1 7/16" size makes donuts 10-16 oz. per dozen.
1 9/16" size makes donuts 14-22 oz. per dozen.

STAR PLUNGER

Produces a ring donut with a "star" pattern around the hole. This is the standard plunger supplied with non-GP Donut Robots.

Available sizes: 1-7/16", 1-9/16"

FRENCH CAKE

Not for French Crullers. To make French Crullers, try the Donut Robot Mark 9.

Available sizes: 1-7/16", 1-9/16"

DOUBLE-MINIATURE

Deposits two mini donuts at a time. Plunger size: 1" diameter only.

ATTACHMENTS

These are small economical ways to make more varieties. Attachments come in one size, and fit a 1-7/16" or 1-9/16" plain plunger only.

DUNKERETTE ATTACHMENT

Forms 2 donuts as shown.

BALL ATTACHMENT

Produces separate balls, or joined balls, depending on the height of the hopper and the type of mix.

NUGGET ATTACHMENT

Produces separate or joined balls, depending on the height of the hopper and the type of mix.

NOTE: PLUNGER SIZE AND DEPOSIT WEIGHT

In general , plunger size determines the diameter of the donut. Deposit weight determines the thickness of the donut. Deposit weight is controlled by adjusting a dial on the Donut Robot depositor.

 

¹ Double miniature plunger not available.